Full Account Management Services
Amazon FBM Offers Deactivated? How to Find the Cause, Reactivate, and Prevent It Before Peak Shipping
Since August 31, 2026, Amazon can deactivate a single FBM offer instead of risking your whole account. Here is how to find the offer, diagnose the metric behind it, fix it, reactivate and prevent a...
- November 22, 2026
- 9 min read
- Mary

Key takeaways
- What changed on August 31, 2026
- What Amazon has and has not said
- Step 1: Find the deactivated offer and confirm the reason
Table of contents
Last checked: November 22, 2026.
If your Amazon FBM offers were deactivated after August 31, 2026, the problem is most likely tied to one offer, not your whole account. According to Amazon's announcement on Account Health updates for FBM offers on the Seller Forums, Amazon now temporarily deactivates an individual FBM offer that puts your Account Health at risk. Amazon says your other active listings and your overall Account Health are not affected.
The offer is judged on four metrics: Cancellation Rate, Late Shipment Rate, Order Defect Rate and On-Time Delivery Rate. To get it back, find the offer in your Account Health dashboard under Other Policy Violations, fix the metric that caused it, then follow the reactivation instructions shown there.
What changed on August 31, 2026
Amazon moved FBM performance enforcement from the account level down to the offer level. Before this change, Amazon says listings that missed required metrics could put the whole account at risk. Now, a single FBM offer that hurts your Account Health can be switched off on its own while the rest of your catalog keeps selling.
Key points from the announcement:
- It is temporary. Amazon describes the deactivation as temporary, but it does not say how long it lasts.
- You get a warning first. Amazon says it sends a warning email before deactivating an offer, with details and steps to take. It does not say how much lead time that email gives you.
- Your overall Account Health is not affected by the offer deactivation itself. If you want a refresher on how the broader score is built, here is how the Account Health Rating works.
A quick definition before going further. An FBM offer is your seller-fulfilled offer on a specific product, meaning you or your 3PL ship the order instead of Amazon. Offer-level deactivation means only that offer stops being buyable, not your listing for every seller or your account.
How this connects to the February 2026 OTDR change
In a separate Seller Forums post, Amazon said that from February 28, 2026, when On-Time Delivery Rate (OTDR) falls below 90%, it deactivates only the seller-fulfilled listings with the most impact on the drop, rather than all of them.
That February post also kept a fallback. If OTDR is "significantly below 90%" or failures repeat, Amazon said it may deactivate all seller-fulfilled listings. Amazon did not define "significantly." The August 31 announcement does not mention any catalog-wide fallback, so treat a broad OTDR problem as a bigger risk than a single flagged offer.
What Amazon has and has not said
What Amazon has said:
- FBM offers that put Account Health at risk are temporarily deactivated at the offer level (August 31, 2026 announcement).
- Other active listings and overall Account Health are not affected by that deactivation.
- The four metrics used are Cancellation Rate, Late Shipment Rate, Order Defect Rate and On-Time Delivery Rate. Valid Tracking Rate is not on that list.
- A warning email comes before deactivation.
- Deactivated offers appear under Other Policy Violations in the Account Health dashboard, where you follow the instructions to reactivate.
- For OTDR specifically, the requirement for seller-fulfilled listings is 90% (February 2026 post).
What Amazon has not said in the announcement:
- Any numeric threshold for offer-level action.
- How long "temporarily" lasts.
- How much notice the warning email gives.
- How an order-level defect gets tied to a single SKU.
- Whether FBA offers are in scope. The post addresses FBM offers only.
Amazon has published account-level targets elsewhere. On its seller blog in a post dated October 16, 2024, Amazon listed Amazon's seller performance targets: keep Order Defect Rate under 1%, Late Shipment Rate ideally under 4% for seller-fulfilled orders, and Cancellation Rate below 2.5%. These are account-level guidance, not confirmed offer-level triggers. They are still a sensible benchmark when you look at a single SKU.
Measurement windows also vary by metric. Rather than rely on a number from a third-party blog, check each metric's detail page in your Account Health dashboard for the current measurement window.
One more caution. Individual sellers in the announcement thread have pointed out that some Seller Central help text still describes broader deactivation of seller-fulfilled offers, which they read as inconsistent with the new offer-level approach. Amazon staff had not replied in that thread when we checked.
Step 1: Find the deactivated offer and confirm the reason
Start in your Account Health dashboard, the Seller Central page that tracks your performance metrics and policy compliance. Open Other Policy Violations and look for the affected offer. Then read the warning email Amazon sent, since it should name the issue and the steps.
Next, confirm this is a performance deactivation and not something else. A listing can also go inactive because of missing attributes, pricing errors, or a suppression. Those follow a different fix path, so check for other listing errors and suppressions if the reason does not mention one of the four metrics.
If you cannot see the offer, you are not alone. Some sellers on Amazon's forums report that the entry sits as a line inside the Policy Compliance card, visible only after clicking "View all." That is an individual seller report, not an Amazon instruction, but it is a quick place to check.
Step 2: Diagnose the metric behind it
Amazon's announcement does not explain how an order-level defect is tied to one offer. The method below is a practical way to investigate. It is our working approach, not an Amazon-described rule.
- Pull order reports for the affected SKU covering the measurement window shown in your dashboard.
- Tag each problem order. Was it cancelled by you, shipped late, delivered late, or did it lead to an A-to-z claim, negative feedback or a chargeback?
- Compare dates. Line up the ship-by and deliver-by dates against the carrier's first scan and delivery scan.
- Look for the pattern. One metric usually stands out. A cluster of late first scans points to handling time. On-time handoffs with late deliveries point to transit settings or the carrier.
The table below summarizes what each metric reflects in plain language, plus common seller-side causes and fixes. The causes and fixes are operational advice based on common FBM patterns, not Amazon policy.
| Metric | What it reflects (plain language) | Likely seller-side causes | Fixes to try |
|---|---|---|---|
| Cancellation Rate | Orders you cancel before shipping | Inventory not synced with your 3PL or other channels, pricing errors, oversold bundles | Sync inventory more often, keep a safety stock buffer, pause the offer when stock is low |
| Late Shipment Rate | Orders confirmed as shipped after the expected ship date | Handling time shorter than real pick and pack time, weekend or holiday cutoffs, late shipment confirmations | Lengthen handling time, set a holiday calendar, confirm shipment the same day you buy the label |
| Order Defect Rate | A-to-z claims, negative feedback and chargebacks | Late or lost deliveries, item not as described, weak packaging | Fix listing accuracy, improve packaging, message buyers within Amazon's rules, respond to claims quickly |
| On-Time Delivery Rate | Orders delivered by the promised date | Transit times in shipping templates set too optimistically, carrier delays, labels without tracking scans | Set realistic transit times, use protected labels through Buy Shipping or Veeqo, choose carriers by region |

If the order data does not point clearly to one cause, or several SKUs are flagged at once, that is usually a sign the issue sits in shared settings like shipping templates or 3PL handoff. This is the kind of review our Amazon account management team handles day to day.
Step 3: Fix the cause before you reactivate
Fix the root cause first. If you reactivate an offer while the same settings are still in place, the next batch of orders can push it straight back into trouble.
Work through the metric you identified:
- Cancellation Rate: Find where stock counts drift. Check your 3PL or multichannel inventory sync, and correct any bundle or variation that can oversell.
- Late Shipment Rate: Compare your handling time setting with how long orders actually take to leave the building. If your team or 3PL needs two days, do not promise one.
- Order Defect Rate: Read the claims and feedback on the affected orders. Item-not-as-described complaints usually mean the listing needs work. Damage complaints usually mean packaging does.
- On-Time Delivery Rate: Review transit times in your shipping template against real carrier performance for the regions you ship to.
Keep a short record as you go: the affected ASIN and SKU, the dates involved, what you changed, and supporting tracking evidence. You may need it in Step 4.
Step 4: Reactivate the offer
For the August 31 change, Amazon's instruction is short: view the deactivated offer under Other Policy Violations and follow the instructions there to reactivate. Amazon does not describe a separate appeal process in the announcement.
For OTDR deactivations under the February 2026 change, Amazon described a specific path:
- Go to Account Health.
- Open Other Policy Violations.
- Select Product Policy Compliance.
- Find the reason "Order Performance - On time Delivery Rate."
- Click Submit Appeal.
Amazon said that submitting this appeal reactivates the listing automatically. Menu labels in Seller Central change from time to time, so your screen may not match this exactly.

If you do not see a reactivation option, individual sellers on Amazon's forums report being told to contact Account Health through Contact Us. Bring the record from Step 3 so the conversation stays specific and shows exactly what you fixed.
Prevent FBM offer deactivations during peak season
Higher holiday order volume makes Late Shipment Rate and On-Time Delivery Rate harder to hold. In replies to Amazon's February 2026 OTDR post, many individual sellers objected that carrier and weather delays outside their control were counting against them.
- Set realistic handling time by SKU or template. Oversized, bundled or made-to-order items often need more time than your default.
- Review shipping templates for peak. Check transit times by region and add holiday cutoffs before the rush, not after the first late orders.
- Use OTDR protection where eligible. In its February 2026 post, Amazon said standard-shipping sellers are protected for OTDR when they use shipping settings automation, automated handling time and OTDR-protected labels bought through Buy Shipping or Veeqo. Check which of these options your account is eligible for in Seller Central before peak orders arrive. For Seller Fulfilled Prime or premium shipping, Amazon said you need to ship on time and use shipping settings automation plus protected labels, while automated handling time is not required.
- Upload valid tracking promptly. Valid Tracking Rate is not one of the four offer-level metrics, but good tracking data supports delivery records and helps when you need to show what happened.
- Prevent stockout cancellations. Sync inventory with your 3PL and other sales channels often enough that you never sell units you do not have.
- Check metrics weekly per SKU. A weekly look at your top FBM SKUs catches a slide before a warning email arrives.
These checks work best as a standing habit, not a one-time cleanup. If you want a broader framework, see an account management routine that prevents suspensions.
Does this apply to FBA offers?
Amazon's August 31, 2026 announcement addresses FBM offers. It does not say FBA offers are affected. If an FBA listing is inactive, look for a different cause, such as a listing error or a separate policy issue.
When to get help
Outside help makes more sense when several FBM offers are flagged together, when your OTDR is well below Amazon's 90% requirement across the catalog, or when you have fixed the cause and still see no reactivation option.
If that sounds like your situation, you can request a free account audit. We review your Account Health dashboard, order reports and shipping settings and tell you what to fix first. No reactivation outcome is guaranteed, but you will know where the problem sits and what to do next.
About the author
Mary
Content Specialist
Mary writes practical Amazon seller guides covering PPC, SEO, listing optimization, and account management.
Keep reading


